用户工具

站点工具


information:tutorial:tutorial_74427

差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

information:tutorial:tutorial_74427 [2011/12/25 02:15]
mi
information:tutorial:tutorial_74427 [2011/12/25 02:18] (当前版本)
mi
行 13: 行 13:
 原帖地址:[[http://www.vocaloid-user.net/modules.php?name=Sections&op=listarticles&secid=4|http://www.vocaloid-user.net/modules.php?name=Sections&op=listarticles&secid=4]]  原帖地址:[[http://www.vocaloid-user.net/modules.php?name=Sections&op=listarticles&secid=4|http://www.vocaloid-user.net/modules.php?name=Sections&op=listarticles&secid=4]] 
  
 +**蓝色为翻译部分。**
  
-深色框内为原文英文。 
  
 +**紫色是标注和读后感。**
  
-蓝色翻译部分。 +===== VOCALOID 共鸣腔控制=====
- +
- +
-红色是标注和读后感。 +
- +
-===== VOCALOID 共鸣腔控制 - 第一部分 =====+
 **Vocaloid Resonance Controls - Part 1** **Vocaloid Resonance Controls - Part 1**
  
 **原作者:Joe Hogan** **原作者:Joe Hogan**
 +===== 第一部分 =====
  
 In this brief article I will attempt to explain what the vocaloid resonance controls are, and give some pointers as to how they can be used. Please note that this is a small article, and will only scratch the surface of what is a massive subject. I hope this tutorial will point users in the right direction, and inspire them to experiment. In this brief article I will attempt to explain what the vocaloid resonance controls are, and give some pointers as to how they can be used. Please note that this is a small article, and will only scratch the surface of what is a massive subject. I hope this tutorial will point users in the right direction, and inspire them to experiment.
行 72: 行 68:
 amplitude 对应部分的共鸣腔音量大小\\  amplitude 对应部分的共鸣腔音量大小\\ 
 frequency 对应部分的共鸣腔的震动频率。\\ </WRAP> frequency 对应部分的共鸣腔的震动频率。\\ </WRAP>
- +<note>(原文用了pitch来表述frequency的作用 Pitch是一种音高定义:用一秒钟的振动数来表示。频率次数多者音高,频率次数少者音低。将每秒振动440次的声音定为“a”,是目前国际通用的标准音。)</note>
-(原文用了pitch来表述frequency的作用 Pitch是一种音高定义:用一秒钟的振动数来表示。频率次数多者音高,频率次数少者音低。将每秒振动440次的声音定为“a”,是目前国际通用的标准音。)+
 <WRAP center round box 95%>band width 对应部分共鸣腔的影响波段宽度。\\  <WRAP center round box 95%>band width 对应部分共鸣腔的影响波段宽度。\\ 
 每个参数范围从0到127,64是默认值。</WRAP> 每个参数范围从0到127,64是默认值。</WRAP>
information/tutorial/tutorial_74427.1324750519.txt.gz · 最后更改: 2011/12/25 02:15 (外部编辑)